odd ball bulkhead

Madison Area Reef Society - Club and reef discussion

Moderator: BraenDead

odd ball bulkhead

Postby bkvistad9 on Sun Sep 21, 2014 6:26 am

I picked up a 120 gallon (48x24x24) with dual corner overflows. Going to be setting up for my first reef tank. In the center of the tank there is a bulk head with two small plastic lines coming out the top of it. About 1/4 o.d and three feet long.They have plugged the bottom side. Any help would be appreciated. Thanks
bkvistad9
 
Posts: 3
Joined: Sat Sep 20, 2014 6:41 pm

Re: odd ball bulkhead

Postby Longinus on Sun Sep 21, 2014 10:45 am

Pictures help :) But I am guessing that the ones in the corner are for overflows and the one in the middle are for a return pump. Check if the two little tubes have a bunch of small holes in them, I imagine they could be spray bars.
-.-- -.-- --..
Longinus
 
Posts: 1179
Joined: Sun Apr 01, 2007 2:48 pm
Location: Madison

Re: odd ball bulkhead

Postby bkvistad9 on Sun Sep 21, 2014 2:03 pm

I am having some trouble getting a picture to load up. They don't have any holes on them that I see. I'll get on my computer later and see if I can upload from there.
bkvistad9
 
Posts: 3
Joined: Sat Sep 20, 2014 6:41 pm


Return to MARS General

Who is online

Users browsing this forum: Majestic-12 [Bot] and 3 guests

cron