Sump hook up
Moderator: BraenDead
3 posts
• Page 1 of 1
Sump hook up
by Mike Brolin on Wed Jan 14, 2015 6:56 pm
Trying find best place to plastic fitting for hooking up sump. Sump came with 1 inch flex hose and need to attach to a Mag 7 I believe has a 3/4 inch male nub. Menard's didn't havewhat I'm looking for. Thanks
- Mike Brolin
- Posts: 399
- Joined: Tue Jun 28, 2005 10:20 pm
- Location: WAUNAKEE
Re: Sump hook up
by nwieczorek on Thu Jan 15, 2015 8:10 am
I think the Mag 7 is as follows...
Outlet Size / Inlet Size: 1/2" MPT / 1/2" FPT
Outlet Size / Inlet Size: 1/2" MPT / 1/2" FPT
- nwieczorek
- Posts: 168
- Joined: Mon Sep 29, 2008 8:59 am
- Location: Madison/Dodgeville
Re: Sump hook up
by Jake on Fri Jan 16, 2015 3:18 pm
Hey Mike, I'm running a mag 24 but I used a female/female pvc fitting with a male PVC barb. Then I used a nylon reinforced clear tubing from Menards with an XL zip tie to hold it on the barb. Helps to heat up the rubber tube with a lighter before sliding it on. Maybe you'll be able to work out something similar?
Patience is bitter, but its fruit is sweet.
-
Jake - Posts: 717
- Joined: Mon Aug 27, 2007 10:59 pm
- Location: Cambridge/Rockdale WI
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 10 guests